Create Bootable USB Flash

Note

USB Flash with Gateway Software will be constantly attached to the NUC during the gateway operation.

1. Insert USB Flash to your computer connected to internet.
2. Download the Gateway Software pack from fw.enapter.com (opens new window) to your computer.
3. Download and install Balena Etcher (opens new window). It will be used to write the Gateway Software image to the USB flash.
4. Start Balena Etcher and follow on-screen instructions: select Gateway Software file, select your USB flash drive, run the flashing process. Wait until flashing is successfully finished.
5. Bootable USB Flash is ready, extract the USB flash from your computer.

Alternative method (Windows only)

Show more

1. Download the Gateway Software pack from fw.enapter.com (opens new window) to your computer connected to internet. Uncompress downloaded file.
2. Download and install Win32 Disk Imager (opens new window). It will be used to write the Gateway Software image to the USB flash.
3. Insert USB Flash to your computer.
4. Start Win32 Disk Imager, select uncompressed WIC file (see the pictures below), select your USB flash drive and press Write button to run the flashing process. Wait until flashing is successfully finished.